Assessment Registration (Lift Engineer)

Thank you for your interest in our Lift Engineer assessment programme.

Pre attendance reading requirements:

These are not included in your registration fee, and should be supplied by your employer.

STANDARDS

  • BS 7980:2003 + A1 2012
  • BS EN 1493:2010

REGULATIONS

  • THE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998 (LOLER)
  • PROVISION AND USE OF WORK EQUIPMENT REGULATIONS 1998 (PUWER)

A guidance on PUWER & LOLER can be found on the GEA website along with The GEA Code of Conduct for Engineers (follow the hyperlinks)

These documents are recommended reading along with a general knowledge of Health & Safety legislation is essential for passing the assessment.

Registration form:

Your place on an assessment is not reserved until we receive your completed registration form,
Please complete the below information to confirm your registration / attendance at least 10 days before attending the course.

    Your Name (required)

    Company Name(required)
    This is the company name as registered with the GEA. If you are not directly employed and are being sponsored by the GEA member please complete your company name in the Sub-contractor field below

    Your Email (required)

    Card Type

    Current card number (if renewing)
    Date of course attending
    Please select.

    Note:

    Dual card registration requires CITB certificate information completing as per below.
    If CITB has not yet been completed please enter scheduled date of the course.

    CITB Certificate Number (only required if dual card)

    CITB Certificate Date DD/MM/YY (only required if dual card)

    Note:

    1. CITB certificate date must be within the last 24 months.
    2. If CITB information is not submitted with 14 days of the engineer assessment being completion, a single card will be issued, and then an administration charge will be required before issuing a Dual card.

    Upload your Photo

    Optional Message

    Directions to Daventry & local parking arrangements .